Method 4: Repair the Boot Camp Drivers: There is a chance that the drivers of Boot Camp may be faulty. Despite, all of that, you could quickly fix the drivers by following the steps below: Boot into the Windows OS from your Mac and insert the Mac OS installation disk; Open the disk's folder and locate the Boot Camp folder. When the Boot Camp Assistant repartitions the Macintosh HD in preparation to install Windows it by default calls the FAT32 partition created as 'BOOTCAMP' and during the Windows install process it is required that the partition be reformatted as NTFS and thus clears the Label Attribute and why it then initially shows as Local Disk. Your customer is deleting the package receipts, probably in the confused and mistaken idea that they are installers (because they have icons that look like installers. I fired up Bootcamp under the OS on the machine at the time – Mac OX 10.13 – and it said it could install windows 7 or later. Well, I wanted to install the latest release of Windows 10, and that’s ‘later’, right? On this model of Mac you need to use an appropriately large (16GB or more) USB stick. After that, click BOOTCAMP and again remove. Step 4: Click on Apply, then on Partition. After that, launch Boot Camp Assistant and try installing Windows to see if the problem is dealt with. Fix 3: Your Disk Could Not Be Partitioned. If you get a message saying that your disk could not be partitioned, then follow our step-by-step guide to fix.
macmommy
New member
For the last month I've had no problems with using my CDrom.
A couple of days ago, I tried to run boot camp to install Windows. Yes, I do have XP Service Pack 2 Retail Version. During the boot camp installation, I inserted the Windows CD when prompted, just to have the Mac spit out the CD and say the installer disk could not be found. After multiple attempts of this I figured I would go to Disk Utility to see if I could see any files that were being read. Disk Utility was empty and no CD was on my desktop.
After that I put in several CD's and movies that I know worked prior and the iMac would try to read them, but then just eject them after about 30 seconds.
I called Apple Care and they told me to take it to a repair shop. I took the iMac in and they called me back to say they had no problem reading any CD's.
After I brought my computer home, the CD rom still didn't work. I rebooted and this time it did. I could see the contents of my Windows XP CD. So, I tried to run bootcamp again. Same problem, it says the installer disk could not be found. Now, not a single CD works. I've tried rebooting, and that doesn't help.
I'm frustrated that the Apple Store couldn't find anything wrong with my computer, yet I can't get it to read CD's. It seems that BootCamp has done something with my CD drive and made it so I can't read CD's. Either that, or Apple makes installing Windows so painful that I just give up.
Nov 13, 2020 • Filed to: Windows Computer Solutions • Proven solutions
Using Windows 10 on a Mac computer is easy than most people give it credit. Then again, it doesn't mean that that it doesn't come with particular problems of its own. Sometimes boot camping Windows 10 on the Mac computer could result in audio or sound issues. However, there are multiple methods to solve it, and we will show you four of them in our guide.
Bootcamp Windows 10 No Sound. How to Fix It?
Apple allows its users to install Windows 10 if they feel like using the operating system through a utility called Boot Camp. It conveniently lets the users switch between macOS and Windows, which is not available on a Windows PC. Though sometimes, this sudden switch of the operating system could result in specific hardware issues within the Mac, such as the sound problem. However, the Boot Camp no sound problem could be easily solved with the four methods listed below, and we will discuss all of them in our guide.
Method 1. Update to the Latest Version of Boot Camp:
You may very well have an outdated version of Boot Camp installed on the Mac computer that could be causing the inability of the device to produce sound. It is wise to install the latest version of Boot Camp on the system, and here is the method to do that:
- From the Apple official website, go to Boot Camp Support and click on 'Downloads;'
- Find the latest version of Boot Camp and click on 'Download;'
- Now follow all the instructions stated with the interface of the Boot Camp utility and finish the installation;
- Restart your Mac computer once the installation is done.
Method 2: Install the Newest Version of your Audio Drivers:
If the sound on your Mac isn't working, then it may very well be due to the outdated version of your Mac's audio driver. You can fix the issue by quickly installing the latest version of the audio driver by following the instructions stated below:
- Open the Windows OS on your Mac and open the default browser;
- Go to Apple Support and search 'Downloads' from the search bar;
- From the 'Downloads' page, type 'Boot Camp Audio Driver' from the search bar;
- Click on the driver for Windows and download it;
- Locate the driver on your Mac and install it by following the built-in instructions;
- Restart your Mac after that.
Method 3: Download and Install the Latest Realtek Drivers:
Realtek is a convenient sound enabling company that helps in providing drivers for your Mac and Windows. The recent switch to the Windows OS on the Mac could disrupt the performance of the driver, and you would have to download and install the latest Realtek Driver on your Mac. Here is the method:
- Learn some information regarding the Realtek driver from the device manager of Windows before going to the Realtek Download Center from your browser;
- Type 'Drivers' on the search bar and enter;
- Locate the intended Realtek driver for your Mac and click on the 'Software' tab in front of the driver and download it;
- From your Mac, locate the driver, install it by following the instructions along the way;
- Restart the Mac system.
Method 4: Repair the Boot Camp Drivers:
There is a chance that the drivers of Boot Camp may be faulty. Despite, all of that, you could quickly fix the drivers by following the steps below:
- Boot into the Windows OS from your Mac and insert the Mac OS installation disk;
- Open the disk's folder and locate the Boot Camp folder;
- Double-click on 'setup.exe' and click on 'Repair' to initiate the process of repairing;
- Once the repair is done, restart your Mac and check whether the sound is working or not!
Bootcamp Windows Installer Disc Could Not Be Found
Recover Lost Data in Windows 10 with Recoverit:
It doesn't matter if you are using Windows OS on a conventional PC or the Mac computer, if your data has been accidentally erased, then it can be recovered with Recoverit Data Recovery software.
The application can work around more than 1000+ different kinds of files and formats and recover them. It also reads data from every type of file support format, including NTFS, FAT, HFS+, and APFS. By following three quick steps, you will be back to using lost data on your system within a few minutes.
Recoverit Data Recovery - The Best File Recovery Software
- Recover corrupted files from the computer, USB hard drive, memory card effectively, safely, and completely.
- Supports to restore corrupted files and loss due to virus attack, the program crashes or computer loses power.
- Recover any data and file types with a high success rate and without any quality loss.
- Supported OS: Windows 10/8/7/XP/Vista, Mac OS 10.13, macOS 10.12, OS X 10.11, 10.10, 10.9, 10.8, 10.7, 10.6.
Step 1. Select a location:
Run Recoverit on your Mac computer with whatever operating system(macOS/Windows) you are using. Select the preferred folder or disk and hit 'Start.'
Step 2. Scan the location:
Boot Camp Installer Disc Could Not Be Found Usb
The scan will not take long, but if you feel the urge to the recovered data beforehand, Recoverit offers the Pause and Stop button to halt the scanning process so that you can check your files. The interface will notify you of the successful scan with a pop-up message.
Step 3. Preview and recover files:
The retrieved data will be laid out under the following categories:
- File Type;
- File Path.
From there, you will be able to select the files both individually and collectively before hitting the 'Recover' button to store them anywhere you like permanently!
Conclusion:
Much like humans, machines can take a while to adjust to new surroundings. The same is the case with the audio drivers of the Mac when you switch the OS from macOS to Windows. However, as we learned in the article, no issue is too big, and one could solve the problem with any of the four methods we have discussed in this guide. Data loss can also occur under such circumstances, but you can recover every last bit with the Recoverit data recovery tool.
Feel free to share this guide amongst family and peers, especially if they are looking to use Windows on their Mac computer.
Computer Data Recovery
- Windows PE
- System problems
- PC Errors